Select Page

Model NO. ATA30, ATA35, ATA40, ATA45, ATA50, ATA80, ATA100 Type Circular Gear Rated Power 1.1kw~193kw Rated Torque 180~17000n.M Gear Arrangement Helical Hardened Gearbox Input Speed 1400r/Min, 900r/Min, 500r/Min Output Speed 25~300r/Min Backstop Alternative Parts, Anti-Slip Device Material Cast Iron Trademark AOKMAN DRIVE Transport Package Ply-Wood Case Specification ISO Origin China HS Code 8483409000

Product Description

ATA Series Shaft Mounted Reduction Gearbox for BlenderFEATURE1. Highly Standard Modular DesignedThe products are easily connected with and driven by different types of motors or other kinds of inputpower. The same type geared motor can be adapted to optioned powers of motors. It’s therefore easy to realize different solutions for varied requirements.2. High strength, Compact dimensionHousings are made of high strength cast iron. Gears and shaft gears are finished with gas carburising process and precise grouding to sequentially get high loading capacity of percertain volume.3. Long service lifeUnder the condition of accurately selection type size and the normal maintenance and use, main components(expect those easily-disabled parts)can last as long as up to more than 25, 000hours. Easily-disabled parts include lubricating oil, oil seals, and bearings.4. Low noiseAll key components are finished by precisely machining, accurate assembly, and finally tested, and therefore, fairly low noise is reached.5. High efficiencyThe efficiency of gear unit can reach 95%, The efficiency of worm gear unit can reach 89%.6. Large radial loading ability7. Axial load ability of up to 5%of radial load8. Mounting ArrangemnetNo strict limitation to the mounting arrangement.9. RatioFeatured many closely divided ratios and wide range of them. Very big final ratios can be obtained through combined unites to reach extremely low output speeds.Type Expression of GF SeriesNote:1. Please make a note, if it needs connecting flange.2. Contents of motors for input shaft types are not listed3. Degree=0, if terminal box position is not mentioned. It is X, if cable entry positon is not mentioned.4. If specific rotation directions of output shaft or/and input shaft are specially requested, please contact our technology department, and make detailed description while placing order.Mounting Arrangements Description:Different kinds of mounting arrangements are defined as following:M1- Horizontally mounted motor, unit base is at bottom.M2-motor is vertically mounted downwards.M3- horizontally mounted motor, unit base is top.M4- motor is vertically mounted upwards.M5- horizontally mounted motor, if placed on M1 position, left side of uni turns to botton(view point: Towards from motor side).M6- horizontally mounted motor, if placed on M1 position, left side of unit turns to top(view point: Towards from motor side).Product pictures:Product application:Our company :AOKMAN® was founded in 1982, which has more than 36 years in R& Dand manufacturing of gearboxes, gears, shaft, motor and spare parts.We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with astrong presence in the international market.AOKMAN® has become areliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.Customer visiting:Our Services:Pre-sale services1. Select equipment model.2.Design and manufacture products according to clients’ special requirement.3.Train technical personal for clientsServices during selling1.Pre-check and accept products ahead of delivery.2. Help clients to draft solving plans.After-sale services1.Assist clients to prepare for the first construction scheme.2. Train the first-line operators.3.Take initiative to eliminate the trouble rapidly.4. Provide technical exchanging.FAQ:1.Q:What kinds of gearbox can you produce for us?A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,P series planetary gearbox and R, S, K, and Fseries helical-tooth reducer, morethan one hundred models and thousands of specifications2.Q:Can you make as per custom drawing?A: Yes, we offer customized service for customers.3.Q:What is your terms of payment ?A: 30% Advance payment by T/T after signing the contract.70% before delivery4.Q:What is your MOQ?A: 1SetIf you have any demand for our products please feel free to contact me

Basic Info.

Model NO. ATA30, ATA35, ATA40, ATA45, ATA50, ATA80, ATA100 Type Circular Gear Rated Power 1.1kw~193kw Rated Torque 180~17000n.M Gear Arrangement Helical Hardened Gearbox Input Speed 1400r/Min, 900r/Min, 500r/Min Output Speed 25~300r/Min Backstop Alternative Parts, Anti-Slip Device Material Cast Iron Trademark AOKMAN DRIVE Transport Package Ply-Wood Case Specification ISO Origin China HS Code 8483409000

Product Description

Customer Question & Answer Ask something for more details (0)

ATA Series Shaft Mounted Reduction Gearbox for BlenderFEATURE1. Highly Standard Modular DesignedThe products are easily connected with and driven by different types of motors or other kinds of inputpower. The same type geared motor can be adapted to optioned powers of motors. It’s therefore easy to realize different solutions for varied requirements.2. High strength, Compact dimensionHousings are made of high strength cast iron. Gears and shaft gears are finished with gas carburising process and precise grouding to sequentially get high loading capacity of percertain volume.3. Long service lifeUnder the condition of accurately selection type size and the normal maintenance and use, main components(expect those easily-disabled parts)can last as long as up to more than 25, 000hours. Easily-disabled parts include lubricating oil, oil seals, and bearings.4. Low noiseAll key components are finished by precisely machining, accurate assembly, and finally tested, and therefore, fairly low noise is reached.5. High efficiencyThe efficiency of gear unit can reach 95%, The efficiency of worm gear unit can reach 89%.6. Large radial loading ability7. Axial load ability of up to 5%of radial load8. Mounting ArrangemnetNo strict limitation to the mounting arrangement.9. RatioFeatured many closely divided ratios and wide range of them. Very big final ratios can be obtained through combined unites to reach extremely low output speeds.Type Expression of GF SeriesNote:1. Please make a note, if it needs connecting flange.2. Contents of motors for input shaft types are not listed3. Degree=0, if terminal box position is not mentioned. It is X, if cable entry positon is not mentioned.4. If specific rotation directions of output shaft or/and input shaft are specially requested, please contact our technology department, and make detailed description while placing order.Mounting Arrangements Description:Different kinds of mounting arrangements are defined as following:M1- Horizontally mounted motor, unit base is at bottom.M2-motor is vertically mounted downwards.M3- horizontally mounted motor, unit base is top.M4- motor is vertically mounted upwards.M5- horizontally mounted motor, if placed on M1 position, left side of uni turns to botton(view point: Towards from motor side).M6- horizontally mounted motor, if placed on M1 position, left side of unit turns to top(view point: Towards from motor side).Product pictures:Product application:Our company :AOKMAN® was founded in 1982, which has more than 36 years in R& Dand manufacturing of gearboxes, gears, shaft, motor and spare parts.We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with astrong presence in the international market.AOKMAN® has become areliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.Customer visiting:Our Services:Pre-sale services1. Select equipment model.2.Design and manufacture products according to clients’ special requirement.3.Train technical personal for clientsServices during selling1.Pre-check and accept products ahead of delivery.2. Help clients to draft solving plans.After-sale services1.Assist clients to prepare for the first construction scheme.2. Train the first-line operators.3.Take initiative to eliminate the trouble rapidly.4. Provide technical exchanging.FAQ:1.Q:What kinds of gearbox can you produce for us?A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,P series planetary gearbox and R, S, K, and Fseries helical-tooth reducer, morethan one hundred models and thousands of specifications2.Q:Can you make as per custom drawing?A: Yes, we offer customized service for customers.3.Q:What is your terms of payment ?A: 30% Advance payment by T/T after signing the contract.70% before delivery4.Q:What is your MOQ?A: 1SetIf you have any demand for our products please feel free to contact me