Model NO. ATA35-ATA125 Type Circular Gear Input Power 1.1-193kw Ratio 5-31 Permitted Torque 180-17000n.M Mounting Type Tie Rod Hanging Shaft Mounted Backstop Alternative Parts, Anti-Slip Device Material Cast Iron Manufacturing Method Forging, Grinding Toothed Portion Shape Helical Trademark AOKMAN DRIVE Transport Package Wooden Case Specification ISO Origin China HS Code 8483409000
Product Description
ATA Series Shaft Mounted Gearbox with Torque Arm
Components:
1. Housing: Nodular Cast Iron(Ductile Iron) QT6002. Gears Profile: Hardened Helical Gears3. Gears Material: 20CrMnTi4. Gears Processing: Carburizing, Quenching, Grinding5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-2076. Gears Accuracy: 6 Class7. Shafts Material: 40Cr8. Input Configurations:Keyed Solid Shaft InputIEC Normalized Motor Flange9. Output Configurations:Keyed Hollow Shaft Output10. Oil Seal: TAIWAN SOG11. Bearings: NSK, SKF, FAG, HRB, ZWZ, LYC12. Spare Parts: Torque arm, Optional Backstop
The features of ATA shaft mounted gearbox:Mounting Type: Tie rod Hanging shaft mountedOutput Shaft: Single key hollow shaft, each model can select three hollow diameter at most.Gearbox Housing: Hard Iron Steel, can be used outside.Anti-slip device: Can suit for any model, It’s very convenient to be mounted.The maintenance of ATA shaft mounted gearbox:1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position2. After three months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with locking screws.4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.Rated Power1.1~193KWIntput Speed500~1400r/minOutput Speed25~300r/minRatioIN=5.0…31.5Installation FormShaft mountedThe models of ATA shafted mounted gearbox:1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA1252 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125DGearbox Parameters:ModelsOutput Bore Dia.Maximum TorqueNominal Ratio(i)ATA3030mm180Nm571012.515202531ATA3535mm420NmATA4040mm/45mm950NmATA4545mm/50mm/55mm1400NmATA5050mm/55mm/60mm2300NmATA6060mm/70mm3600NmATA7070mm/85mm5100NmATA8080mm/100mm7000NmATA100100mm/125mm11000NmATA125125mm/135mm17000NmProduct pictures:Product application:Our company :AOKMAN® was founded in 1982, which has more than 36 years in R& Dand manufacturing of gearboxes, gears, shaft, motor and spare parts.We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with astrong presence in the international market.AOKMAN® has become areliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.Customer visiting:Our Services:Pre-sale services1. Select equipment model.2.Design and manufacture products according to clients’ special requirement.3.Train technical personal for clientsServices during selling1.Pre-check and accept products ahead of delivery.2. Help clients to draft solving plans.After-sale services1.Assist clients to prepare for the first construction scheme.2. Train the first-line operators.3.Take initiative to eliminate the trouble rapidly.4. Provide technical exchanging.FAQ:1.Q:What kinds of gearbox can you produce for us?A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,P series planetary gearbox and R, S, K, and Fseries helical-tooth reducer, morethan one hundred models and thousands of specifications2.Q:Can you make as per custom drawing?A: Yes, we offer customized service for customers.3.Q:What is your terms of payment ?A: 30% Advance payment by T/T after signing the contract.70% before delivery4.Q:What is your MOQ?A: 1SetIf you have any demand for our products please feel free to contact me
Basic Info.
Model NO. ATA35-ATA125 Type Circular Gear Input Power 1.1-193kw Ratio 5-31 Permitted Torque 180-17000n.M Mounting Type Tie Rod Hanging Shaft Mounted Backstop Alternative Parts, Anti-Slip Device Material Cast Iron Manufacturing Method Forging, Grinding Toothed Portion Shape Helical Trademark AOKMAN DRIVE Transport Package Wooden Case Specification ISO Origin China HS Code 8483409000
Product Description
Customer Question & Answer Ask something for more details (0)
ATA Series Shaft Mounted Gearbox with Torque Arm
Components:
1. Housing: Nodular Cast Iron(Ductile Iron) QT6002. Gears Profile: Hardened Helical Gears3. Gears Material: 20CrMnTi4. Gears Processing: Carburizing, Quenching, Grinding5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-2076. Gears Accuracy: 6 Class7. Shafts Material: 40Cr8. Input Configurations:Keyed Solid Shaft InputIEC Normalized Motor Flange9. Output Configurations:Keyed Hollow Shaft Output10. Oil Seal: TAIWAN SOG11. Bearings: NSK, SKF, FAG, HRB, ZWZ, LYC12. Spare Parts: Torque arm, Optional Backstop
The features of ATA shaft mounted gearbox:Mounting Type: Tie rod Hanging shaft mountedOutput Shaft: Single key hollow shaft, each model can select three hollow diameter at most.Gearbox Housing: Hard Iron Steel, can be used outside.Anti-slip device: Can suit for any model, It’s very convenient to be mounted.The maintenance of ATA shaft mounted gearbox:1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position2. After three months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with locking screws.4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.Rated Power1.1~193KWIntput Speed500~1400r/minOutput Speed25~300r/minRatioIN=5.0…31.5Installation FormShaft mountedThe models of ATA shafted mounted gearbox:1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA1252 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125DGearbox Parameters:ModelsOutput Bore Dia.Maximum TorqueNominal Ratio(i)ATA3030mm180Nm571012.515202531ATA3535mm420NmATA4040mm/45mm950NmATA4545mm/50mm/55mm1400NmATA5050mm/55mm/60mm2300NmATA6060mm/70mm3600NmATA7070mm/85mm5100NmATA8080mm/100mm7000NmATA100100mm/125mm11000NmATA125125mm/135mm17000NmProduct pictures:Product application:Our company :AOKMAN® was founded in 1982, which has more than 36 years in R& Dand manufacturing of gearboxes, gears, shaft, motor and spare parts.We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with astrong presence in the international market.AOKMAN® has become areliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.Customer visiting:Our Services:Pre-sale services1. Select equipment model.2.Design and manufacture products according to clients’ special requirement.3.Train technical personal for clientsServices during selling1.Pre-check and accept products ahead of delivery.2. Help clients to draft solving plans.After-sale services1.Assist clients to prepare for the first construction scheme.2. Train the first-line operators.3.Take initiative to eliminate the trouble rapidly.4. Provide technical exchanging.FAQ:1.Q:What kinds of gearbox can you produce for us?A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,P series planetary gearbox and R, S, K, and Fseries helical-tooth reducer, morethan one hundred models and thousands of specifications2.Q:Can you make as per custom drawing?A: Yes, we offer customized service for customers.3.Q:What is your terms of payment ?A: 30% Advance payment by T/T after signing the contract.70% before delivery4.Q:What is your MOQ?A: 1SetIf you have any demand for our products please feel free to contact me